Electric-driven

Electric manure mixer

Spinder carry to models of electric manure mixers: 

  1. model L-E1: standard mixing capacity
  2. model Speed: mixing capacity 45% higher than model L-E1

Both models have a continuous shaft and can also be driven by a tractor.
These electric manure mixers come with two support trestles for mounting to the guide rails, but not with switch and wiring.

 1. model L-E1

In many cases the right mixer. Available lengths of 420 cm and 520 cm and in various power outputs.

  • speed: 516 RPM electric-driven (1000 RPM tractor-driven)
  • With a propulsion auger
  • reversible direction of rotation, standard propulsion
  • mixing frame size: 70 x 70 cm
capacity propulsion auger mixing capacity
11 kW/15 pk
15 kW/20 pk
18,5 kW/25 pk
ø 400 mm
ø 420 mm
ø 440 mm
1452 m3/uur
1620 m3/uur
1795 m3/uur


2. model Speed

The high-capacity manure mixer. The model Speed manure mixers are driven by a special 6-pole three-phase motor with plenty of torque and a maintenance-free drive line. The combination of lower speed and larger diameter mixer screw results in a more effective mixture and homogenisation of the slurry.

Available in lengths of 520 cm and 600 cm and in various power outputs.

  • speed: 350-400 RPM electric-driven (1000 RPM tractor-driven)
  • with a propulsion auger
  • reversible direction of rotation, standard propulsion
  • mixing frame size: 70 x 70 cm
capacity propulsion auger mixing capacity

11 kW/15 pk
15 kW/20 pk
18,5 kW/25 pk
22 kW/30 pk

ø 560 mm
ø 600 mm
ø 600 mm
ø 600 mm

1943 m3/uur
2229 m3/uur
2670 m3/uur
2848 m3/uur


Switsch box

The electric-driven manure mixers are both connected to the main grid by way of a switch box. This switch box is fitted with main switch, soft start, left/right switching, emergency stop and timer.

The control cabinet must match the power output.

  • electric mixer
  • electric powered manure mixer
  • adjustable holder
  • electric mixer Speed
  • electric powered manure mixers, stationary installation

Accessories

Built-in mixer frame, guide rails, adjustable holders

For a mixer in a pit to work properly, a built-in mixer frame (70 x 70 cm) must be part of an intermediate wall. Using a guide rail, the mixer can be conveniently put in place. Standard guide rails are 5 metres long. 6-metre-long guide rails are also available.
The guide rails can be suspended from a suspension bracket.

Our electric manure mixers come with two support trestles. Supports trestles can be placed on a guide rail or attached to the mixing pit by means of an adjustable holder. The standard adjustable holder has a setting range of 60 to 120 cm. A reinforced version has a setting range of 100 to 170 cm.

Information sheet

Here you will find all the information you need with regard to the electric manure mixers.

Requesting information?

Would you like to receive information about the Electric Manure mixer? We will be happy to tell you what we can do. Fill in your details here, and we will contact you.

Information request Electric Manure mixer

Your Spinder dealer

Spinder works exclusively with dealers who share the same core values: quality, reliability and professionalism. There is always a dealer in your region.

Find your Spinder dealer here

Submersible manure mixer