Spinder circulation pump unit
Drinking

Water circulation pump unit

Spinder also supplies the Suevia water circulation pump system for the cold barns with drinking troughs.

Water is heated and pumped around. The circulation pump unit has one or two heating elements, a variable thermostat and a circulation pump. The system works as a boiler installation, which may cause pressure to rise in the pipelines. The water pressure in the supply pipe must be at least 1 bar and may not exceed 4 bar.

A non-return valve, a breather valve and a pressure relief valve are supplied to protect the circulation system.

If fitted with return water temperature controls, the required return water temperature is set on the thermostat. The thermostat is attached to the return pipe.

  • circulation pump system with heating
  • 3000 or 6000-Watt model
  • easy operation
  • built-in overheating protection
  • enamelled cast iron housing
  • Suevia-water circulation pump unit
  • Suevia-water circulation pump unit

Specifications water circulation pump unit

The maximum pipe length, including return line, is approximately 200 metres for the 3000-Watt version and approximately 350 metres for the 6000-Watt version.  The circulation unit has one or two heating elements, a variable thermostat and a circulation pump. 

The 3000-Watt circulation pump unit is available in 230 V and 400 V models. The 400 V model is recommended if 400 V power supply is available. If fitted with return water temperature controls, set the required return water temperature on the thermostat in the return line. The heating element is automatically switched on if the temperature drops below the set value.

For the 300 and 303 models, a turning knob on the heating element is used to set the required temperature of the discharged water. The heating element is thermostatically controlled and switches itself on and off.

Circulation pump unit 3000 W

  • Model 303, 230 V
  • Model 317, 230 V with return water temperature control
  • Model 300, 400 V
  • Model 311, 400 V with return water temperature control


Circulation pump with 6000 W

  • Model 312, 400 V with return water temperature control

 

More information

All information about the water circulation pump unit can be found here:

Drinking Catalogue

Requesting information?

Would you like to receive information about the water circulation pump unit? We will be happy to tell you what we can do. Fill in your details here, and we will contact you.

Information request water circulation pump

Your Spinder dealer

Spinder work exclusively with dealers who share the same core values: quality, reliability and professionalism. There is always a dealer in your region.

Find your Spinder dealer here

Drinking bowlsProduct catalogue Drinking